Bosch Hot Water Systems

  • Senior Citizen Discount
  • No Call Out Fee
  • Same Day Plumbing
  • 24/7 Fast & Reliable

Bosch Hot Water Systems

Bosch Hot Water Systems for Medium Density Housing

Bosch hot water systems for medium density housing must be designed to blend well into existing suburban areas. The design should offer a desirable living environment that allows for increased densities in an incremental but sustainable way, without compromising amenities and overall character.

The concerned architects and developers have to consider how the buildings relate to the neighbouring surroundings and streetscapes, as well as how the space can be utilised efficiently. Meeting these requirements demands creativity and innovation.

How Water Solutions for Medium Density Housing Design

The hot water unit is one crucial aspect that is usually overlooked in the early stages during the design process. This often has an adverse effect on the finished home. This is because unlike in low density housing design, space is much of a concern. We cannot therefore afford to overlook the hot water system till a later stage in the design process.

Failure to consider the type of hot water technology as well as the installation location negatively affects the amenity and the aesthetics of the dwelling, devalues the development in the short-term and increases the operating costs in the long-term.

The two major factors to consider when choosing a hot water solution for the medium density housing sector are the available sources of energy and the type of hot water technology to be used. These two factors will determine how the designer will integrate the hot water system into the dwelling.

Heating Water With Electricity or Gas

Water heating often accounts for 25% of the energy used by a typical household. Because of this, the choice of a hot water system is important to managing energy consumption in the household. The first decision made when selecting a hot water solution is the source of energy to be used, where electricity and gas are the two common choices.

The developer must decide if both gas and electricity are needed in the building. While electricity connection will be automatic, deciding to connect gas will be dictated by the kind of appliances specified into the development plan, including heating, cooking and hot water.

For a medium density development, the additional costs incurred because of connecting gas will be overshadowed by the benefits. Notable benefits include the efficiency of gas appliances, an increased choice of appliances that make the property more appealing to potential buyers and the increase in the overall value of the property.

Generally, an electric hot water system has lower capital cost, but is more expensive to run than a gas hot water system. Gas is therefore more attractive to consumers. Besides, gas hot water systems produce about 25 to 33 percent lesser greenhouse gases than their electric counterparts. With the increased focus on energy efficiency, gas connection is the preferred choice for sustainable design. Moreover, many gas hot water systems have high energy efficiency, with many of them achieving a 6-star rating.

Selecting A Suitable Hot Water Technology

The architect or the developer must consider the installation location early in the design process. This ensures that installing the hot water appliance does not adversely affect the appearance and the amenity of the dwelling. The designer must choose between internal appliances and their external counterparts.

External appliances are suitable for balconies or ground applications, but may compromise the available outdoor space. For the internal appliances, it is important to consider the type, as well as the installation location.

For your hot water units need, please call Anytime Hot Water at 1800 633 920. We would be more than glad to assist you!

SYDNEY HOT WATER SYSTEM REPAIR

Book Online & Save $25